• State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 4241 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has anyone successfully compiled SCP Firmware for Morello FVP Bare metal?

Raj

Has anyone successfully compiled SCP Firmware for Morello FVP as described in Morello FVP Bare Metal example that comes with Arm IDE for the FVP to start from 0x14000000? 

If so, what was the gcc compiler value used for CC & PRODUCT=morello

Parents
  • 0

    Hi, yes I managed compile the SCP firmware for bare metal with the 14000000 address back in February. I created a new workspace using the dev tool facility, modified the SCP code and re-ran bit bake. This method is already set up with the correct build options for morello and then used the new files to run my bare metal code. All worked fine. (I used this method since I could not get the gcc method to work at all.)

Reply
  • 0

    Hi, yes I managed compile the SCP firmware for bare metal with the 14000000 address back in February. I created a new workspace using the dev tool facility, modified the SCP code and re-ran bit bake. This method is already set up with the correct build options for morello and then used the new files to run my bare metal code. All worked fine. (I used this method since I could not get the gcc method to work at all.)

Children
No data